ANALISIS INTESITAS CAHAYA PADA AREA PRODUKSI SHORTENING TERHADAP KESELAMATAN DAN KENYAMANAN KERJA KARYAWAN DI PT. X
Keywords:
Lighting,, Eye Complaints, Regression Analysis, Lux MeterAbstract
In the industrial world, employee safety and comfort are crucial aspects that cannot be ignored. One factor that significantly affects these aspects is adequate workplace lighting. This study aims to evaluate the impact of light intensity and eye complaint factors on worker safety and comfort and provide recommendations for companies with lighting that does not meet the standards of the Indonesian Minister of Health Regulation No.70 of 2016. The research method involves regression analysis and data collection through observation in the form of questionnaires and light measurement data, processed quantitatively, conducted at PT. X. Questionnaire results analyzed with linear regression testing indicate that light intensity in the shortening packaging and control rooms at PT. X negatively impacts employee safety and comfort, with a total effect of 80.8%. Based on direct measurements using a light intensity measurement tool (lux meter), the light intensity conditions in the shortening packaging and control rooms range from 103–267 lux. This intensity level does not meet the standard of 300 lux for production rooms, as stated in the Indonesian Minister of Health Regulation No.70 of 2016. Thus, the company needs to control light intensity to prevent accidents and discomfort among employees caused by inadequate lighting conditions
References
Adinda Pramesthi Riadyani, & Chahya Kharin Herbawani. (2022). SYSTEMATIC REVIEW PENGARUH INTENSITAS CAHAYA TERHADAP KELELAHAN MATA PEKERJA. JURNAL KESEHATAN MASYARAKAT, 10(2), 167–171.
Agnieszka Wolska, Dariusz Sawicki, & Małgorzata Tafil-Klawe. (2021). Visual and Non-Visual Effects of Light (1st ed.). CRC Press.
Ariesandy, J., Teguh Oktiarso, & Yurida Ekawati. (2022). Usulan Perbaikan Sistem Kerja Dengan Micromotion Study dan Analisis Pengaruh Pencahayaan Terhadap Kecepatan Kerja PT Dwi Putra Perkasa Malang. Jurnal Teknik Industri UMC, 2(1), 67–76. https://doi.org/10.33479/jtiumc.v2i1.26
Badan Standardisasi Nasional. (2004). SNI 16-7062-2004. Badan Standardisasi Nasional.
Besse Irna Tawaddud. (2020). Kajian Illuminati pada Laboratorium Teknik Grafika Polimedia Jakarta terhadap Standar Kesehatan Kerja Industri (K3). Jurnal Nasional Ilmu Kesehatan, 2(3), 141–150.
Cengiz, M. S. (2019). Effects of Luminaire Angle on Illumination Performance in Tunnel Lighting. Balkan Journal of Electrical & Computer Engineering, 7(3), 250-256. https://doi.org/10.17694/bajece.563021
Dupláková, D., & Duplák, J. (2022). Digital Transformations for Lighting in the Workplace (1st ed.). CRC Press. https://doi.org/10.1201/9781003359937
Ghozali, I. (2018). Aplikasi Analisis Multivariate dengan Program IBM SPSS 25. Semarang: Universitas Diponegoro.
Guntur, B., & Putro, G. M. (2017). ANALISIS INTENSITAS CAHAYA PADA AREA PRODUKSI TERHADAP KESELAMATAN DAN KENYAMANAN KERJA SESUAI DENGAN STANDAR PENCAHAYAAN. OPSI, 10(2), 115. https://doi.org/10.31315/opsi.v10i2.2106
Hari Putranto, Slamet Wibawanto, & Dio Alif Pradana. (2021). Modul Perencanaan Pencahayaan Instalasi Penerangan Listrik. Ahlimedia Press.
Jonathan Warsono, “Mengenal apa itu Analisis Regresi”, http://www.jonathansarwono.info/regresi/regresi.htm
Juara Mangapul Tambunan, Albert Gifson, Hendrianto Husada, & Samsurizal. (2021). Buku Ajar Pencahayaan. Institut Teknologi PLN.
Kepmenkes Nomor 1405/MENKES/SK/2002 (2002).
Li, J., Cui, X., Huang, Q., & Li, J. (2024). Determining Safe Working Hours of Wearing Medical Disposable Protective Clothing From Physiological Thermal Limits: A Pilot Study. AATCC Journal of Research. https://doi.org/10.1177/24723444231222564
Menteri kesehatan RI. (2016). Permenkes No 48 tahun 2016 tentang Standar eselamatan dan Kesehatan Kerja Perkantoran.
Mia Ajeng Alifiana, Akh. S. A. S. K. R. P. (2023). ANALISIS PENCAHAYAAN DAN AUDIT ENERGI DI RUANG PERSPUTAKAAN UNIVERSITAS MURIA KUDUS. Journal of Industrial Engineering and Technology, 3(1), 48–57. https://doi.org/10.24176/jointtech.v3i1.9106
N A Smith. (2000). Lighting for Health and Safety (1st ed.). Butterworth-Heinemann Ltd.
Peraturan Menteri Kesehatan Republik Indonesia Nomor 70 Tahun 2016 Tentang Standar dan Persyaratan Kesehatan Lingkungan Kerja Industri (2016). Indonesia.
Shofa Putri Reida, Yanti Sri Rejeki, & Anis Septiani. (2024). Rancangan Perbaikan Lingkungan Kerja yang Ergonomis menggunakan Software Dialux dan Computational Fluid Dynamic. Bandung Conference Series: Industrial Engineering Science, 4(1), 580–590. https://doi.org/10.29313/bcsies.v4i1.12154
Soni Faisal Rinaldi, & Bagya Mujianto. (2017). Metode Penelitian dan statistik. Badan pengembangan dan pemberdayaan Sumber Daya Manusia Kesehatan.
Sugiyono, 2009, Metode Penelitian Kuantitatif, Kualitatif dan R&D, Bandung : Alfabeta.
Widodo, A., & Purnomo, H. (2017). Regresi Linear Sederhana: Teori dan Aplikasi. Surabaya: Penerbit Universitas Airlangga
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Cakrawala Ilmiah
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
