PHYSICAL TEST OF LUBRICATING OIL VISCOSITY (KINEMATIC VISCOSITY) AND TBN (TOTAL BASE NUMBER) OF LUBRICATING OIL USING AND WITHOUT USING A CJC TYPE FINE FILTER ON THE MAIN ENGINE KM BINAMA II: Indonesia

Mustopa Kamal; Ade Hermawan; Basino Basino; Priyantini Dewi; I Ketut Daging; Faizal Fachruddin

Authors

Mustopa Kamal Politeknik Ahli Usaha Perikanan
Ade Hermawan Politeknik Ahli Usaha Perikanan
Basino Basino Politeknik Ahli Usaha Perikanan
Priyantini Dewi Politeknik Ahli Usaha Perikanan
I Ketut Daging Politeknik Ahli Usaha Perikanan
Faizal Fachruddin Politeknik Ahli Usaha Perikanan

Keywords:

Lubricating Oil, Fine Filter, Testing Method, Viscosity

Abstract

This research focuses on the viscosity and Total Base Number (TBN) of lubricating oil in diesel engines. The study tests the characteristics of new lubricating oil, oil used for 500 hours without and with CJC type fine filters, and oil used for 1336.5 hours with CJC fine filters. The testing follows the ASTM D445-21e2 and ASTM D2896-21 methods at the PT PETROLAB SERVICES Laboratory. The results reveal that using CJC fine filters can prolong the life of lubricating oil, as it preserves the quality, particularly within the first 500 working hours. However, beyond 1336.5 hours, some test results become unreasonable, indicating that the oil is no longer suitable for use. To gain a comprehensive understanding of the changes in lubricating oil quality, further testing at 750 and 1000 hours is suggested. Overall, this research highlights the importance of maintaining lubricating oil quality in diesel engines and the potential benefits of using CJC fine filters.

References

Alirejo, M Subroto et al. 2018. “Kajian Penerapan Viskositas Minyak Pelumas Pada Mesin Penggerak Utama Kapal Perikanan Di Pt. Hasil Laut Sejati Study of the Implementation of the Viscosity of Lubrication Oil in the Fishering Main Movement Machine in Pt. Hasil Laut Sejati.” Jurnal Kelautan dan Perikanan Terapan JKPT 1: 1.

C. C. Jensen. 2023. “mengapa penyaringan oli offline?” https://www.cjc.dk/tribology/why-offline-oil-filtration/.

eurofins. 2017. “Sumber Kromium.” https://testoil.com/data-interpretation/sources-of-chromium/.

Galbi, Mohammad, dan Ishak A. 2017. “Prediksi Penggantian Minyak Pelumas Motor Diesel Generator Set Berdasarkan Laju Perubahan Viskositas Dan Total Base Number Dengan Pendekatan Linieritas.” Bina Teknika 12(1): 111.

Haryono, I, dan H Nolandy. 2019. “Analisa Pelumas Bekas Pada Uji Engine Berbahan Bakar Minyak Mentah (Crude Oil).” Prosiding SENIATI: 318–23. https://ejournal.itn.ac.id/index.php/seniati/article/view/1200.

Hasanah, Hasyim. 2017. “TEKNIK-TEKNIK OBSERVASI (Sebuah Alternatif Metode Pengumpulan Data Kualitatif Ilmu-ilmu Sosial).” At-Taqaddum 8(1): 21.

Kusdiantoro, Kusdiantoro, Achmad Fahrudin, Sugeng Hari Wisudo, dan Bambang Juanda. 2019. “Kinerja Pembangunan Perikanan Tangkap Di Indonesia.” Buletin Ilmiah Marina Sosial Ekonomi Kelautan dan Perikanan 5(2): 69–84.

Lasabuda, Ridwan. 2013. “Pembangunan Wilayah Pesisir Dan Lautan Dalam Perspektif Negara Kepulauan Republik Indonesia.” Jurnal Ilmiah Platax 1(2): 92.

Novandi, Arluky. 2012. “Penentuan masa penggantian pelumas melalui monitoring pelumas.” Forum teknologi 02(3): 26–34.

Pertamina Lubricants Guide. “Meditran S SAE 10W, 30, 40, 50.” https://binaceriabersama.com/content/upload/808-Meditran-S-SAE-10W,-30,-40,-50.pdf.

PT. Petrolab Services. 2021. “Silicon Pada Oil Analysis.” https://petrolab.co.id/silicon-pada-oil-analysis/.

Purjiyono, Astriawati, N., & Santosa, P. S. (2019). Perawatan Sistem Pelumasan Mesin Utama Pada Kapal Km. Mutiara Sentosa II. Jurnal Teknovasi: Jurnal Teknik Dan Inovasi, 6(1), 74–80.

Siskayanti, Rini, dan Muhammad Engkos Kosim. 2018. “Analisis Pengaruh Bahan Dasar Terhadap Indeks Viskositas Pelumas Berbagai Kekentalan.” Jurnal Rekayasa Proses 11(2): 94.

Siswahyu, Agung, dan Tri Yuni Hendrawati. 2013. “Modifikasi Minyak Nabati Sebagai Sumber Bahan Baku Pelumas Bio.” Jurnal Teknologi 2(2): 23–32.

Sudiar, Asrul. 2014. “Perbaikan Kualitas Minyak Pelumas dengan Additive.” Jurnal Poros Teknik 6(1): 1–54.

Toif Albastomi I, Harjono, S.T., M.T. 2018. “Peningkatan Perawatan untuk Mengurangi Timbulnya High Soot Engine pada Mesin Diesel Komatsu SAA6D140E-3.” : 3–4.

wahyu widodo, Rianto, dan M.T. Harjono, S.T. 2018. “Analisa Kerusakan Engine High Blow-By Pada Mesin SAA6D114E-3 PC 300-8 Komatsu.”

Winterfield, Craig, dan Jeff Walkup. 2023. “Sumber Dan Penyebab Tembaga Dalam Analisi Minyak.” Fluid Life (Equipment Reliability Services). https://www.fluidlife.com/blog-identifying-sources-of-copper-using-sem-eds/.